Tip The wireless settings that you will need for your printer are the same settings that are used to connect any other device to your wireless network. On the last page of the printer settings document is a Node Type listing. Important points you need to confirm before configuring your Brother machine for a wireless network. Page count only 6 for testing. To help us improve our support, please provide your feedback below.
|Date Added:||9 November 2017|
|File Size:||28.16 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Power cord and usb cord included. None No encryption method is used. Wait at least one minute for the printer to refresh itself with the wireless settings. Tested and working, just under 2k pages total printed, includes drum and toner, power and usb cord, Install CD, test prints. Browse Related Browse Related.
The Brother HLW is a printer that can be connected to a wireless network, providing a solution for multicomputer printing in a wireless environment. Press the “Go” button on the printer three times to print out the printer settings. Very helpful Helpful Not helpful.
Configuring the wireless network settings (For HLW)
Go to the Contact Us section. Connecting a new printer to your computer can create a variety of problems. Do not choose this SSID. The latest up to date print drivers and the full users manual can be downloaded for FREE from the Brother website. How does the information on this page help you? Shared key A secret pre-determined key is shared by all devices that will access the wireless network.
How to Set up an HlW for Wireless | It Still Works
Printer has been used and tested recently and is in excellent condition. The HLW provides flexible paper handling via an enclosed sheet capacity tray and a manual by-pass slot for printing envelopes and letterhead.
To achieve optimum results with wieless everyday document printing, place the Brother printer as close to the network access point router as possible with minimal obstructions. Keep holding the “Go” aireless down until all of the lights on the top of the printer are illuminated, then release the “Go” button.
Pinter with drum and toner only. Press wlreless “Go” button tjhree times to print out the printer settings again. The SSID is a byte or less value and is assigned to the access point. This unit was tested and cleaned. Skip to main content. Each wireless channel is on a different frequency. Launch an Internet browser, then type the IP address for your router. The Brother printer uses the WEP keys as the pre-determined key.
FAQs & Troubleshooting
If this listing says “Inactive,” you need to connect the Ethernet cable to a different port on the back of the router, then repeat this step. This FAQ explains how to configure your Brother machine for a wireless network using the Wireless setup wizard and a network cable temporarily.
If the installation screen does not appear automatically, click here to see how to open the installan. Check and record the current wireless network settings below.
If your question was not answered, have you checked other FAQs? Wireelss methods Encryption is used to secure the data that is sent over the wireless network.
3 Configuring the wireless network settings (For HL-2170W)
Hold down the “Go” button on the top-left side of the printer, then continue to hold the button as you use the power switch to turn the printer back on. Also shop in Also shop in. The Brother printer supports the following encryption methods: The access point and wireless network devices regularly send wireless packets referred to as a beacon which has the SSID information.